PRE RINSE

Begin by rinsing your car using a pressure washer or a garden hose with a spray gun on the “jet” setting. Work from the top down to remove loose dirt, dust, mud, pollen, bird droppings, and other contaminants.

This step is crucial to minimise the risk of scratches and swirl marks, as it clears gritty particles before any contact wash. Pay extra attention to lower panels, wheel arches, and bumpers, which tend to collect the most road grime.

WHEELS & TYRES

Spray Envoke Reactive Wheel and Tyre Cleaner across the wheel face, spokes, and inner barrel, and apply a tyre cleaner or all-purpose cleaner to the sidewalls. Allow to dwell for 30–60 seconds, don’t let it dry.

Use a soft wheel brush for the face and spokes, a barrel brush for the inner barrel, and a smaller brush for tight areas like lug nuts. Scrub tyres with a stiff bristle tyre brush to remove dirt, browning, and old dressing. Rinse thoroughly from top to bottom.

Tip: Always clean wheels and tyres before the main wash to avoid transferring brake dust or grit onto your paint. Keep wheel brushes separate from paint brushes.

Apply Envoke Snow Foam using a foam cannon or gun, covering the entire vehicle. The thick foam encapsulates remaining dirt, road grime, and contaminants from the pre-rinse.

Let it dwell for a few minutes, but never allow it to dry. Then rinse thoroughly from BOTTOM to TOP. This step adds an extra layer of protection before touching the paint, reducing the chance of scratches.

Once the vehicle is clean and dried, apply the detail spray that suits your finish.

Envoke Ceramic Detail Spray

Instantly increases gloss, slickness, and hydrophobic water behaviour.

Perfect as a topper after every wash for coated paint, boats, and caravans.

Helps your ceramic coating perform at its peak between washes.

Envoke Matte & PPF Detail Sprays

Designed specifically for matte finishes and paint-protection films.

Removes dust and fingerprints without adding any unwanted shine.

Keeps matte textures and PPF clarity looking factory-correct.

Use Envoke Reboot every month, or every fourth wash to deep clean your ceramic coating.

Removes mineral deposits, salt, scale, and stubborn road film that normal shampoo cannot.

Restores gloss, slickness, and water behaviour.

Ideal for vehicles exposed to harsh environments like dirt roads, coastal areas, or frequent mineral/salt buildup.

This "reset" wash keeps your coating performing like new long-term.